Weld backing strips & Tapes are highly durable and undergo stringent quality tests before being packed for dispatch. Application System is an emerging icon of success infusing brilliance in an exclusive range of premium quality products for the electrical and automobile industry. We are an unmatched manufacturer and exporter of Magnetic Powder Brakes and Clutches, Eddy Current Drives and Dynamometer, Load Cells, Web Tension Control Systems and DC Drives, etc.

LOAD CELLS

Strain gauge type load cell – a tension transducer for web tension monitoring & controlling is available in various ratings 5 Kg to 1000 Kg.

ASW series of tension sensing load cell are full bridge strain-sensitive, with built-in self-aligning bearings for self adjusting critical vertical as well horizontal level while mounting suitable for dead shaft or live shaft applications. These are manufactured in ratings from 5 Kg to 150 Kg in five sizes, for base or flange mounting.

For ratings beyond 150 Kg, Upto 1000 Kg, these are manufactured in compression& tension type constructions, cater to most of the popular sizes load cells & applications.

All Load Cells are excellent in linearity and repeatability with a nominal output of 1mV/V or 2V/V depending on applications.

6. WEB TENSION CONTROL SYSTEMS
To control unwind, rewind & intermittent section tension control.

Various models are manufactured such as dancer based tension control, Load cell based tension control, Diameter based tension control, ultrasonic sensor based tension control & manual tension / torque control

CENTRE WIND TENSION CONTROLLER
Non contact tension controller for Rewind & Unwind. Compatible with AC / DC & Eddy Current Drives.

CTC - To maintain constant tension thru out diametric build up, with advance taper tension facility to get proper winding & avoid telescoping, core crushing due to internal layer pressure etc. This controller had GD² compensation, Taper, Set tension Potentiometer

7. STATIC CHARGE ELMINATORS

To eliminate static charge from textile yarns, fabrics, plastic films & articles, FBD in pharma machines. Static charge eliminators are available in various models such as Hot bars, Shock less bars, Area ioniserxc , Air ioniser etc.

We manufacture static charge systems upto 30 KV volts at 5 mA current

8. TACHOGENERATOR

Tachogenerator is a device which generates an electrical output directly proportional to the shaft speed. The voltage thus generated is fed to a speedometer for speed measurement and/or used as feed - back signal for controlling the speed of a rotating machine / equipment. In every automatic control system, since the system performance is directly related to the performance it becomes essential that the Tachogenerator must satisfy certain minimum requirements such as:

Linear
The rectified output voltage should be strictly linear with respect to the rotational speed
Output signal
the ripple content in the rectified output signal must be as low as possible
Temperature effect
Variations in ambient temperature should have negligible effect on the TG output
Long-term stability
Instability of output cause due to aging of parts, shift in magnetic circuits etc., should be minimum

Unique features of Tachogenerator
ALINCO permanent magnet in the rotor assembly gives long term stable operation under varying ambient temperature.
Large number of poles (48) results in a high frequency output and hence good dynamic response,
linearity and wide speed control, along with low ripple content in the rectified output.
Rotor and stator assemblies are encapsulated with epoxy resin to prevent any ingress of moistures, dust etc.
AC tachogenerators in 24 or 48 pole constructions with quasi-sinusoidal output of 30/ 50 Volts AC (rms) @ 1500 rpm
Stator assembly is housed in cast iron body to minimize magnetic interaction and consequent losses.
Grease filled, double shielded ball bearings are used for maintenance free operation.
Two mounting options-foot mounted and flange mounted.
Speedometer can be calibrated to suit the customer's requirements.
Compact and rugged construction provides longer life with excellent performance even under severe environments.
If required, TG can be supplied with rectifier unit, for DC operations.
Technical Specifications
Type -Totally enclosed
Class of insulation -B
Voltage - 30V / 50V AC and frequency 600Hz at 1500 rpm
Max. Load Resistance at Output - 600 Ω
No. Of poles - 48
Linearity - 0.5%

9. Control Panels

MCC, PCC & special control panels for various applications in various industries.

3 Drive & 5 Drive control systems or Printing & Lamination industry are manufactured by us.

Static Chrge Eliminators | Tachogenerator | Control Panels | Welding Backup Tapes

Home | About Us | Products | Enquiry | Sitemap

Gawkar Industrial Estate, Panchpakhadi Service Road Thane - 400 602, Maharashtra, India
Phone : 022 32420541 / 25383001 Fax : 022 25301145 Mobile : +(91) 9323724866
Email :

Designed & Hosted by : MID Pramoted by : GID

applicationsystems.net | weldingbacking.co.in | dynamometer.co.in

BEST VIEW 1024 X 768 PIXELS